Home / Technical Questions / Otis E411MMS CAT 5 Testing Procedures
66.8k
21.6k
  • CoachD
  • Joined: Apr 2021
  • Posts: 1
Does anybody have an writeup on how to do a Cat 5 test on an Otis E411MMS controller? I'm doing a acceptance on a drive replacement and the Inspector won't allow the inspection to start without an "Official" writeup of not only the drive testing procedures but the CAT 5 testing procedures as well. Any help would be greatly appreciated. Thanks!
#1 10/04/22 03:36 AM
check your PM
#2 10/05/22 02:53 PM
What state are you in you have to have an acceptance test done after replacing a drive?
#3 10/10/22 02:34 AM